To choose elec­tric heater, you need to con­sid­er not only the area of ​​u200bu200bthe room, but also its inte­ri­or. We have pre­pared sev­er­al prin­ci­ples, guid­ed by which you can eas­i­ly deter­mine the most suit­able con­vec­tor.

The first principle: heat in “squares”

It is nec­es­sary to choose an elec­tric heater at the rate of 100 W for each “square” of a room with three-meter ceil­ings. That is, to deter­mine the pow­er of an elec­tric heater, you need to mul­ti­ply the area of ​​u200bu200bthe room by 100.

It turns out that for a liv­ing room of 18–20 square meters, you will need to buy elec­tric heatergen­er­at­ing about 1800–2000 W, and for a kitchen of 7 “squares” enough con­vec­tor with a pow­er of 700–800 watts. If, con­vec­tor is planned to be used as an addi­tion­al heat source, then, when deter­min­ing its pow­er, it is nec­es­sary to make adjust­ments for the tem­per­a­ture dif­fer­ence, which must be com­pen­sat­ed.

The second principle: fit into the interior

Con­vec­tor will delight its own­er if it har­mo­nious­ly fits into the inte­ri­or of the room. To this end, the col­or scheme of the device is prefer­ably select­ed based on the char­ac­ter­is­tics of the room. In addi­tion, it is nec­es­sary to think in advance about where and how it will be locat­ed. con­vec­tor. Depend­ing on this, it is nec­es­sary to deter­mine its size and type (floor or wall).

Third Principle: Emphasis on Accuracy

Elec­tric heaters Depend­ing on the mod­el, they can be equipped with either mechan­i­cal or elec­tron­ic ther­mostats. Con­vec­tors with an elec­tron­ic ther­mo­stat with greater accu­ra­cy (up to 0.1 ° C) deter­mine the tem­per­a­ture in the room, while mechan­i­cal ther­mostats fix the tem­per­a­ture with an accu­ra­cy of 1–2 ° C, and with pro­longed use, the mea­sure­ment accu­ra­cy may dete­ri­o­rate. In addi­tion, elec­tron­ic ther­mostats are com­plete­ly silent and more durable. So before you buy elec­tric heaterit will not be super­flu­ous to pay atten­tion to which ther­mo­stat it uses.

The fourth principle: everything is protected

Mod­ern con­vec­tors usu­al­ly include a built-in ther­mal fuse. In case of acci­den­tal heat­ing of the device, it will auto­mat­i­cal­ly turn off, and after a while it will resume oper­a­tion again. More­over, some mod­els of elec­tric heaters also sup­port anti-freeze mode.

Fifth principle: more “convolutions”

Before choos­ing a con­vec­tor, it is bet­ter to make sure that it is “intel­li­gent”. elec­tric heater must sup­port sev­er­al modes and pro­vide indi­vid­ual tem­per­a­ture con­di­tions for each room. Also, many devices are able to work in econ­o­my mode. In gen­er­al, con­vec­tors must with­stand seri­ous “marathons”, that is, they must func­tion for a long time with­out human inter­ven­tion.

Leave a Reply