The gear pump is one of the types of rotary pumps. Engage­ment in this type of device can be twofold: exter­nal or inter­nal. Both ver­sions of the pump have sta­ble per­for­mance, sim­ple struc­ture, ease of use as well as reli­a­bil­i­ty. The per­for­mance of a par­tic­u­lar pump depends on the motor placed in it and its speed of rota­tion. On the web­site https://tehnogrupp.com/katalog/nasosy-po-tipu/shesterennye-nasosy you can pur­chase the pre­sent­ed equip­ment at afford­able prices.

Gear pump: prin­ci­ple of oper­a­tion

Gear hydraulic pumps are char­ac­ter­ized by a rather spe­cif­ic design. Their rotors dri­ve gears that suck flu­id into the so-called inter­den­tal space, and then, block­ing the teeth, push it fur­ther. Only one of the wheels is required to dri­ve, as it dri­ves the oth­er. One such pump can oper­ate from two to five gears. Gear pumps oper­ate at con­stant effi­cien­cy, and their speed is most often between 500 and 4000 wheel rev­o­lu­tions per minute.

gear pump

It is a sealed steel inter­nal clutch gear pump with a mag­net­ic dri­ve. Pumps of this type are applic­a­ble in all indus­tries. They work great when trans­port­ing both rare and very sticky media, from choco­late to fuels and oils. Main advan­tages:

  • even flow,

  • sim­ple main­te­nance

  • high effi­cien­cy,

  • pump­ing of var­i­ous media,

  • sol­id con­struc­tion,

  • ease of main­te­nance and clean­ing.

These types of pumps are used to han­dle liq­uids of var­i­ous vis­cosi­ties. It can be fuel, oils or even choco­late.

Tech­ni­cal capa­bil­i­ties

That’s not all, because the media in a gear pump instal­la­tion can also be syrup, tar, liq­uid fat, pet food, oil, paint, or ink. The spe­cif­ic design ensures that the gear pump does not clog, regard­less of the degree of den­si­ty and vis­cos­i­ty of the medi­um.

Mag­net­ic dri­ve pumps are rec­om­mend­ed for instal­la­tions that cir­cu­late poten­tial­ly dan­ger­ous, cor­ro­sive, tox­ic or very expen­sive liq­uids, they are char­ac­ter­ized by their her­met­i­cal­ly sealed design and thor­ough leak­age pro­tec­tion. The pro­duc­tion of such pumps requires a large amount of met­al. But at the same time, the reli­a­bil­i­ty of the equip­ment is great­ly increased. You can ver­i­fy this for your­self.

Leave a Reply