The Dyson air puri­fi­er is a device that not only cleans the air, but also warms, humid­i­fies, cools, kills bac­te­ria and elim­i­nates unpleas­ant odors. There are sev­er­al dif­fer­ent mod­els that dif­fer in addi­tion­al func­tion­al­i­ty and price. The device has its pros and cons. How the air clean­er jus­ti­fies itself, read on.

What is a device?

The main pur­pose of the device is to puri­fy the air in the room. Each mod­el is equipped with a fan func­tion and a sealed fil­ter that traps and elim­i­nates any con­t­a­m­i­nants, includ­ing virus­es and bac­te­ria down to 0.1 microns.

Cleaner in the bedroom

Accord­ing to the man­u­fac­tur­er Dyson, air clean­ers are designed with the lat­est tech­nol­o­gy. The devices have a styl­ish design and a pow­er­ful clean­ing sys­tem. Suit­able for any home space.


Most of the body is made of white plas­tic, which makes the device neat and attrac­tive. Oth­er exter­nal fea­tures:

  • Thanks to smooth bends, dirt that appears dur­ing the use of the device is eas­i­ly removed.
  • The low­er part of the air clean­er is the air duct. It is paint­ed in a sil­ver shade and is also made of durable plas­tic.
  • Some mod­els, for exam­ple, Dyson Pure Hot + Cool, tilt in dif­fer­ent direc­tions, chang­ing the direc­tion of the air flow. The block itself also rotates 350 degrees. Tilts do not inter­fere with the mobil­i­ty of the block.
  • There is only one but­ton on the body of the device — pow­er on and off. Oth­er func­tions are con­trolled by the remote con­trol.
  • The but­tons on the remote con­trol are intu­itive. You can store it on the top of the case — a mag­net­ic mount was spe­cial­ly installed there.

There is a col­or dis­play on the body of the remote con­trol, which indi­cates impor­tant infor­ma­tion:

  • tech­ni­cal details;
  • oper­at­ing modes;
  • tem­per­a­ture, humid­i­ty and air qual­i­ty;
  • con­tent of var­i­ous par­ti­cles in the air.

Device and principle of operation

The man­u­fac­tur­er tried to cre­ate a sim­ple com­pact device that allows you to use and main­tain the device your­self with­out spe­cial tech­ni­cal knowl­edge.

Dyson Pure Cool Me

Using the exam­ple of the Dyson Pure Hot + Cool mod­el (cool­ing + heat­ing func­tion), let’s ana­lyze how the air clean­er works and works. The device con­sists of sev­er­al parts:

  • Heat­ing part with dis­si­pa­tion of puri­fied air. Heat­ing ele­ments are made of ceram­ics. They auto­mat­i­cal­ly adjust the required air tem­per­a­ture before it exits the dif­fuser.
  • Air Mul­ti­pli­er Tech­nol­o­gy. A dif­fuser that con­ducts 310 liters of air through the “ring” in 1 sec­ond. The air flow is pow­er­ful, but feels soft. The sys­tem cir­cu­lates a stream of puri­fied air through­out the room.
  • Ther­mo­stat reg­u­la­tor. Locat­ed at the bot­tom of the device. Pre­vents the device from over­heat­ing. As soon as the tem­per­a­ture lev­el reach­es the desired val­ue (this is set by the user), the device stops heat­ing. When the degrees decrease, the device turns it on.
  • 2 sep­a­rate cir­cuits. Through them, air exits from the front or back of the device.
  • Cir­cu­lar dou­ble fil­ter. Cov­ers 360 degrees around itself. Con­sists of a HEPA fil­ter that col­lects the small­est dust par­ti­cles and 99.95% of micro-aller­gens and pol­lu­tants.
    Inside is a sec­ond acti­vat­ed car­bon fil­ter. It cap­tures gaseous sub­stances — nitro­gen diox­ide, formalde­hyde and ben­zene.
  • Intel­li­gent sen­sors. They do air con­trol. In real time, they inform the user about the state of the air­space (its qual­i­ty).
  • Built-in LCD dis­play. Dis­plays all use­ful infor­ma­tion about the air.

How an air puri­fi­er works:

  1. Pol­lut­ed air enters the fil­ter.
  2. Then it goes through a thor­ough clean­ing inside the sys­tem.
  3. The dis­tri­b­u­tion “ring” even­ly releas­es clean air through­out the room.

Dyson equip­ment has no restric­tions on the cubic capac­i­ty of the room. This infor­ma­tion is not includ­ed in the instruc­tions. The area of ​​the room can only affect the rate of air purifi­ca­tion or heat­ing.


Each mod­el has its own spec­i­fi­ca­tions. Below is a gen­er­al list of per­for­mance data and fix­tures.

Tech­ni­cal details:

  • Num­ber of speeds. All mod­els have a stan­dard — 10.
  • Air flow pow­er. From 28 to 324 liters per sec­ond.
  • The weight. From 2.8 kg to 8.29 kg.
  • Cord length — 1.8 m.
  • Noise lev­el. There are silent mod­els with night mode. The aver­age lev­el is 41 dB. With active pow­er­ful work — up to 62 dB.
  • Pow­er con­sump­tion — up to 40 watts.

air purifier

Addi­tion­al func­tion­al­i­ty:

  • mois­tur­iz­ing;
  • cool­ing;
  • heat­ing;
  • fan;
  • air purifi­ca­tion con­trol;
  • WiFi.

What’s Includ­ed:

  • the device itself;
  • remote con­trol;
  • pow­er unit;
  • user man­u­al;
  • bat­ter­ies (not on all mod­els).

Pros and cons of the device

Hav­ing stud­ied the prin­ci­ples of oper­a­tion of Dyson air puri­fiers and famil­iar­ized your­self with their func­tion­al­i­ty, you can notice many advan­tages:

  • the device qual­i­ta­tive­ly puri­fies the air;
  • has many addi­tion­al func­tions;
  • suit­able for any room design;
  • has small dimen­sions;
  • easy to use and main­tain;
  • there is a wide selec­tion of devices, includ­ing the avail­abil­i­ty of bud­get mod­els;
  • The machine is almost silent.

On review sites, users are active­ly dis­cussing Dyson’s short­com­ings:

  • Even with the night mode, the device makes sounds. Though not loud, but dis­turb­ing sleep.
  • The mobile app is not work­ing. It is banned in Rus­sia. Smart­phone con­trol is not pos­si­ble. At the moment, work is under­way to cre­ate a work­ing appli­ca­tion in our coun­try.
  • High price. Even for state employ­ees of the mid­dle class, it does not jus­ti­fy itself.
  • Expen­sive con­sum­ables. It is rec­om­mend­ed to change the fil­ter 1 time in 6–12 months (depend­ing on pol­lu­tion). 1 replace­ment fil­ter costs more than 5–7 thou­sand rubles.
  • Does not save (does not cool) in dry, hot, stuffy weath­er. It is pri­mar­i­ly a puri­fi­er, not a cool­er or humid­i­fi­er.
  • After a month of active work, the air clean­er fil­ter remains as clean as pos­si­ble (white, with­out dust), although, if we take a sim­ple vac­u­um clean­er as an exam­ple, after 20 min­utes of air intake in the room, the fil­ter in it becomes gray and dusty. Con­clu­sion — cleans­ing is not so thor­ough.

Cleaner in the room

How to use a Dyson air purifier?

Detailed instruc­tions for using the air clean­er are sup­plied sep­a­rate­ly with each mod­el. Gen­er­al rec­om­men­da­tions for using the Dyson Pure Hot+Cool appli­ance:

  1. Remove the device from the car­ton.
  2. Unpack all acces­sories.
  3. Press down but­tons on the sides and remove the out­er pro­tec­tive pan­els.
  4. Insert both parts of the com­bined fil­ter.
  5. Then rein­stall the pro­tec­tive pan­els.
  6. Before use, make sure that the device is assem­bled exact­ly accord­ing to the instruc­tions. Do not dis­as­sem­ble the device or use it with­out the oval attached.
  7. Install on a flat and sta­ble sur­face.
  8. Take the pow­er sup­ply from the box and con­nect it to the device, then plug it into the mains.
  9. Turn on the device by press­ing the but­ton on the front pan­el or using the remote con­trol.
  10. Select “Auto” on the remote con­trol. When enabled, a quick cal­i­bra­tion is per­formed. In this cycle, the air speed con­trol is car­ried out auto­mat­i­cal­ly, adjust­ing to the room tem­per­a­ture and opti­mal heat­ing. When cal­i­bra­tion ends, the device oper­ates at the set air­flow rate.
  11. Next, select the desired room tem­per­a­ture:
    • press­ing the big red but­ton allows you to increase the desired tem­per­a­ture by 1 degree;
    • press­ing the small red but­ton decreas­es the tem­per­a­ture by 1 degree.

The air clean­er does not work as a heater if the set tem­per­a­ture is below room tem­per­a­ture.

Instruc­tions for oper­at­ing the device can be found in this video:

Selecting a suitable location and security

Just putting the device in the select­ed room is not enough. In order for the device to prop­er­ly cir­cu­late puri­fied air, it is impor­tant to install it in a con­ve­nient and safe place:

  • the opti­mal solu­tion is floor instal­la­tion;
  • if you have small chil­dren or pets, place the clean­er on a table or cab­i­net;
  • if it is not pos­si­ble to install the device low, try to have 1 m of free space from its top to the ceil­ing.

Which loca­tion is unde­sir­able for instal­la­tion:

  • Plac­ing the air clean­er under the table, in the clos­et, behind the cur­tains. It’s point­less.
  • Do not place the device near heat­ing ele­ments — radi­a­tors and oth­er heaters.
  • It is not rec­om­mend­ed to install the clean­er on win­dow sills in win­ter. The room will get very cold.

Instrument care

The man­u­fac­tur­er does not indi­cate the fre­quen­cy of clean­ing the air clean­er. But it is known that noth­ing can be washed and cleaned inside the device. The fil­ter is dis­pos­able. When it is time to replace it, the cor­re­spond­ing infor­ma­tion appears on the screen of the device.

The out­er part of the device still has to be cleaned as it gets dirty. It is rec­om­mend­ed to use a dry and damp cloth or soft bris­tle brush. It is advis­able to use spe­cial wet wipes for clean­ing equip­ment.

Mod­els with a humid­i­fi­ca­tion func­tion have a deep clean­ing. This is an auto­mat­ic evap­o­ra­tor clean­ing pro­gram. It is car­ried out in sev­er­al steps indi­cat­ed in the instruc­tions that come with the device.

How to check the remain­ing life of the fil­ter using the remote con­trol:

  1. Click on the “Infor­ma­tion” but­ton.
  2. The screen will dis­play infor­ma­tion about the resource of each fil­ter.

Then fol­low the instruc­tions:

  1. Before chang­ing the fil­ter, turn off the air clean­er and unplug it from the mains.
    Switch off
  2. Press the 2 but­tons locat­ed on the sides of the instru­ment simul­ta­ne­ous­ly to remove the pro­tec­tive cov­er.
  3. Then take out the appro­pri­ate fil­ter.
    Take out the filter
  4. Insert a new fil­ter and assem­ble the device in the same sequence.
    Insert new
  5. Plug the device back into the net­work and press the “Pow­er on” but­ton.
  6. Reset fil­ter life. When replac­ing the HEPA fil­ter, press and hold the night mode but­ton on the remote con­trol for five sec­onds. If you changed the char­coal fil­ter, press and hold the Sleep Timer but­ton for 5 sec­onds. If you replaced both fil­ters at once, press and hold each but­ton in turn.
    Sleep timer
  7. On the LCD screen, you will see a count­down from five for each fil­ter.
  8. As soon as con­fir­ma­tion appears on the screen, the air puri­fi­er is ready for oper­a­tion again.
    Ready for work

It is dan­ger­ous to let any liq­uids or oth­er objects enter the machine. The device may be dam­aged.

Overview of popular models

Each pre­sent­ed mod­el dif­fers in addi­tion­al func­tion­al­i­ty and cost. But all of them are aimed at high-qual­i­ty air purifi­ca­tion.

Dyson Pure Hot+Cool

We con­sid­ered this mod­el in detail as the main exam­ple of an air clean­er. This is a 3 in 1 clean­er, cool­er and heater. In addi­tion to the above fea­tures, the device has:

  • Night mode. The screen is shad­ed, the machine pro­duces the least amount of noise.
  • Angle of rota­tion — from 45° to 350°.
  • Per­mis­sion for use in aller­gy suf­fer­ers.

Dyson Pure Hot+Cool


  • air flow capac­i­ty — 310 liters per sec­ond;
  • pow­er con­sump­tion — 2 250 W;
  • weight — 5.71 kg;
  • noise lev­el — from 46 to 62 dB;
  • cord length — 1.855 m;
  • dimen­sions — 764 x 130 x 205 (mm).

The aver­age cost of the device is 44,000 rubles.

Dyson PH01

Improved mod­el. Device type — air puri­fi­er with ven­ti­la­tion + air humid­i­fi­er.

Dyson PH01


  • ultra­vi­o­let water purifi­ca­tion;
  • air pol­lu­tion sen­sor (PM2.5, PM10, nitro­gen diox­ide and oth­er volatile organ­ic com­pounds);
  • 3 air­flow modes — blow­ing, scat­tered flow and breeze;
  • bio­sta­t­ic evap­o­ra­tor with sil­ver threads;
  • 36 hours of con­tin­u­ous evap­o­ra­tion of mois­ture;
  • shut­down timer — from 30 min­utes to 8 hours;
  • deep clean­ing cycle;
  • indoor humid­i­ty and tem­per­a­ture indi­ca­tor.


  • air flow pow­er — 320 l / s;
  • pow­er con­sump­tion — 45 W;
  • weight — 8.29 kg;
  • the noise lev­el of the puri­fi­er and fan — from 41 to 46 dB, only the puri­fi­er — 58–61 dB;
  • cord length — 1.855 m;
  • device dimen­sions — 155 x 220 x 923 (mm).

The aver­age cost is 55,000 rubles.

Dyson Pure Cool Me

Com­pact air puri­fi­er. It has con­ve­nient man­u­al con­trol of a focused air flow — one touch of the dome is enough. Mod­el Fea­tures:

  • smooth rota­tion — 70 degrees;
  • func­tion “Com­fort­able sleep” — set­ting the timer from 30 min­utes to 8 hours;
  • fil­ter replace­ment sen­sors;
  • cool­ing sys­tem.

Dyson Pure Cool Me


  • air flow pow­er — 28 l / s;
  • pow­er con­sump­tion — up to 40 W;
  • weight — 2.8 kg;
  • noise lev­el — from 43 to 59 dB;
  • cord length — 1.8 m;
  • dimen­sions — 401 x 247 x 254 (mm).

The aver­age cost of the device is 20,000 rubles.

Where can you buy?

The entire Dyson line is sold in any home appli­ance stores. You can also order the device on the offi­cial web­site — The man­u­fac­tur­er gives a 2‑year war­ran­ty and free ship­ping if the pur­chase is made through the com­pa­ny’s web resource.


Mari­na, 29 years old, Tom­sk. Bought a Dyson Pure Hot+Cool six months ago. The thing is cool. I don’t know if it actu­al­ly cleans the air as thor­ough­ly as they promise, but I have become much stronger in sleep­ing with it. Cools nice­ly, but not like an air con­di­tion­er. Just a gen­tle, bare­ly per­cep­ti­ble breeze. Minus one — the loan for him is still pay­ing.

Valery, 44 years old, Moscow. I’m aller­gic. Pur­pose­ful­ly pur­chased an air clean­er. I chose Dyson, because I have a vac­u­um clean­er from the same com­pa­ny — it has been serv­ing faith­ful­ly for the sec­ond year. He has no price. This is where the air puri­fi­er comes in handy. I read that many com­plain that it does not work and does not save from aller­gies. Guys, close the win­dows. So that pollen and aller­gens do not enter the room in a con­stant stream. Turned on the dyson, and after 20 min­utes no aller­gens — clean­li­ness. But you should not expect the fresh­ness of alpine mead­ows from the device.

Air puri­fiers from Dyson are con­sid­ered a new gen­er­a­tion of tech­nol­o­gy, so their price is high. Styl­ish design, ver­sa­til­i­ty, patent­ed tech­nolo­gies — all this gives an advan­tage over com­peti­tors. If you can’t afford such equip­ment, get more bud­get cli­mate equip­ment.

Leave a Reply