Reasons for the formation of condensation on windows inside and outside the window

Con­den­sa­tion is most like­ly one of the caus­es list­ed above, and in most cas­es it can be eas­i­ly fixed by fol­low­ing these steps.

How to eliminate condensation on windows inside and out

  • Dur­ing cook­ing, make sure all pots and pans are cov­ered and open a win­dow next to the cook­ing area.
  • If you have a range hood over your stove, use that as it will help remove any damp air.
  • Open a win­dow when show­er­ing or use an exhaust fan if you have one.
  • Avoid dry­ing inside your home. When they dry out, moist air will evap­o­rate into your home.
  • Use your heat­ing sys­tem to main­tain a con­stant and sta­ble tem­per­a­ture to keep sur­faces warm, reduc­ing the chance of con­den­sa­tion

Open win­dows for at least an hour a day, as this will allow clean air to replace the warm, moist air in your rooms.

Where con­den­sa­tion forms, wipe it off as soon as pos­si­ble to reduce the risk of it evap­o­rat­ing back into the air.

Here are some basic steps you need to take to at least reduce the risk of con­den­sa­tion not only on your win­dows, but in your home as a whole. If humid­i­ty is kept to a min­i­mum and your sur­faces are at a con­stant tem­per­a­ture, this should be a good way to reduce the risk of con­den­sa­tion buildup.

Reasons for the formation of condensation on windows inside and outside the window

Condensation around windows

When work­ing with your insu­lat­ing glass units, con­den­sa­tion usu­al­ly forms in one of 3 places:

On inte­ri­or win­dows

On out­er win­dows

Inter­me­di­ate glazed sec­tions of her­met­ic dou­ble-glazed win­dow

Inter­nal fix­a­tion of con­den­sate

As we said above, if the main prob­lem is mois­ture on the inter­nal sur­faces of the glaz­ing, try to reduce the amount of mois­ture present in your home by open­ing win­dows and doors reg­u­lar­ly and allow­ing fresh air to replace the stale, mois­ture-laden one. Ven­ti­late, pre­pare and show­er with win­dows open and turn on exhaust fans if you have them (if not, con­sid­er installing them), dry clothes out­side, etc.

Condensation inside the window what to do

By doing this, you should see a dra­mat­ic reduc­tion in mois­ture build-up, per­haps not com­plete­ly remov­ing it, but cer­tain­ly bring­ing it down to a more man­age­able lev­el.

After you’ve tak­en all these steps and you don’t see any or very lit­tle dif­fer­ence, this could be a sign that your dou­ble glaz­ing is no longer what it once was and is now allow­ing cold out­side air to cool down. inner glass pan­el, cre­at­ing ide­al con­di­tions for con­den­sa­tion.

If this is the case, then there is real­ly very lit­tle that can be done oth­er than replac­ing the sealed glass unit and frame, and although it is expen­sive, it can not only elim­i­nate con­den­sa­tion prob­lems, but also help save on your heat­ing costs.

Condensation outside the window

Con­den­sa­tion on the out­side of the glass pane

Exter­nal fix­a­tion of con­den­sate

This par­tic­u­lar prob­lem is indeed quite rare and is a plus in most cas­es! This is a sign that your win­dows are well insu­lat­ed. In faulty or low-qual­i­ty appli­ances, heat trans­fer occurs, in which heat from the inner pan­el pass­es through the air gap and heats the out­er pan­el.

Where the heat exchange process is pre­vent­ed due to the ther­mal prop­er­ties of the sealed unit, mois­ture may con­dense, caus­ing con­den­sa­tion.

While this can be quite annoy­ing as it obvi­ous­ly obstructs your view out­side the win­dow, it is a sign that your win­dows are in good con­di­tion and are pre­vent­ing too much heat loss.

Condensation between sealed glass panes

There is usu­al­ly only one rea­son for con­den­sa­tion and mois­ture between glaz­ing, and that is that the bond­ing lay­er that seals the two panes of glass has failed.

Some­times there may be oth­er rea­sons such as unusu­al­ly cold or wet weath­er, high mois­ture con­tent from fresh paint, plas­ter or large scale build­ing work on site, or that the base of the frame is filled with water and this grad­u­al­ly seeps out over time, but in most cas­es this is due to for the very tight­ness of the dou­ble-glazed win­dow.

At the moment you have only two options:

Replace defec­tive dou­ble glaz­ing or repair it

The first point is pret­ty obvi­ous — con­tact the pro­fes­sion­als to install a new sealed block or, if your dou­ble glaz­ing is old, install a com­plete­ly new frame and block.

As for the sec­ond option, this is def­i­nite­ly one of the options to con­sid­er. Over the past few years, var­i­ous com­pa­nies have emerged that spe­cial­ize in repair­ing the tight­ness of dou­ble-glazed win­dows.

Condensation on windows

Dif­fer­ent com­pa­nies will use dif­fer­ent repair meth­ods, but essen­tial­ly the mois­ture is removed and the device is resealed.

As with most things, you get what you pay for, and some of the cheap­er fix­es often fail quick­ly.

This is a brief overview of the caus­es and reme­dies for con­den­sa­tion in and on dou­ble glaz­ing.

Leave a Reply